Serving the Midland area  ·  (432) 224-0791  ·  Open Mon-Sun 7am-7pm
📞 (432) 224-0791 Free Quote

Metal Roofing in Midland, TX (79701) · Local Professionals

Midland Metal Roofing · Fast response in Midland and the Midland area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+199Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Midland is a city built on oil, brick, and wind. From the 1950s brick ranches in Grassland Estates to the new two-story stucco homes going up in the north-side subdivisions, every roof here faces the same Permian Basin punishment: relentless sun, spring hail, and dust storms that sandblast shingles and panels alike.

When your roof starts leaking or you're ready to upgrade to metal, you want a crew that knows the difference between a mid-century ranch near the Midland Country Club and a new build in a northwest subdivision. We're based here, we've worked on everything from oilfield shops to historic homes, and we're a Metal Roofing Alliance member. Call (432) 224-0791 for a free inspection in 79701 and surrounding areas.

Metal Roofing in Midland (79701)

Roofing in Midland isn't just about covering a house. The flat high plains sit at about 2,800 feet, and the wind never stops. That constant wind, combined with intense year-round sun, dries out sealants, loosens fasteners, and peels back panels if they weren't installed right. Then comes hail season, which can dent even some metal panels and definitely takes a toll on shingles. After every big storm, more homeowners ask about Class 4 metal roofing. We also deal with dust storms that clog gutters and scour finishes, and the occasional winter ice storm that can dam up at the eaves. Whether you're in a post-war brick home in south Midland, a ranch house out in Martin County, or an oilfield shop off Highway 191, we know the failure modes: failed fasteners, separated seams, flashing gaps, and wind-lifted panels. Our team handles standing seam, corrugated and ribbed panels, stone-coated steel, and even copper for specialty jobs. We're fully insured with general liability and workers' compensation, so you're covered from the first day on site.

We've been serving Midland and the surrounding areas for years, from the neighborhoods around Wadley-Barron to the fast-growing subdivisions in northwest Midland and Odessa. We know the local building stock and the weather patterns, and we know what it takes to make a metal roof last in West Texas.

Our services in Midland

How a Job Works in Midland

Step 1: You call us at (432) 224-0791 or fill out our contact form. We schedule a free on-site assessment, typically within a day or two. We'll inspect your existing roof, take measurements, and talk through options, whether that's a repair, a full replacement, or a retrofit over your current shingles. We'll also check for any HOA or historic district requirements that might affect your choice of panel profile or color.

Step 2: Once you approve the estimate, we pull the necessary permits. Roofing permits are commonly required for a full replacement or re-roof in Midland, and thresholds vary, so we always verify with the local building department. We coordinate with your schedule and get the materials delivered. On install day, our insured crew gets to work. Tight lots in older neighborhoods can mean careful staging, and we always protect your landscaping and driveway. If you're in a historic district or HOA, we've already made sure the color and profile are approved.

Step 3: When the job is done, we do a thorough cleanup, magnet sweep for nails, and a final walkthrough with you. We don't leave until you're satisfied and you know how to maintain your new roof. We also provide documentation for insurance claims if needed, though we never promise coverage.

Metal roofing in Midland isn't a one-size-fits-all price. For a typical 1,500 to 2,000 square foot ranch home, you're looking at roughly $8 to $10 per square foot for basic corrugated or ribbed panel installation, or $10 to $12 per square foot for standing seam. A full replacement with metal over shingles (retrofit) starts around $7 per square foot. Repairs for leaks or failed fasteners typically start at $450, and screw replacement runs from $750. Stone-coated steel and metal shingles are in the $9 to $10 per square foot range, while copper or specialty metals start around $20. The final price depends on roof complexity, access, existing layers, and whether any structural work is needed. We give free estimates, so call (432) 224-0791 and we'll break it down for your specific home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Midland and nearby areas.

My 1960s brick ranch in Grassland Estates has original shingles and some hail dents. Can I put metal over them?
Often yes, but it depends on the number of existing layers and the condition of the decking. Texas code limits how many layers you can recover over, so we'll inspect and let you know if a retrofit is allowed or if a full tear-off is needed. We'll also check for soft spots or rot that could affect the new roof.
A storm just peeled back some panels on my shop roof off Highway 191. How fast can you get out?
We prioritize storm and wind damage calls. Call us at (432) 224-0791 and we'll schedule a free inspection, usually within 24 to 48 hours. We can tarp or secure the area if needed and provide a repair estimate on the spot.
What's the typical cost to replace a metal roof on a 2,000 square foot home in Midland?
For a standard standing seam roof, expect roughly $20,000 to $24,000, depending on pitch, access, and whether you need a tear-off. Corrugated panels can be less, around $16,000 to $20,000. We'll give you an exact quote after a free inspection.
Do I need a permit for a metal roof replacement in Midland, and how do I check?
Yes, roofing permits are commonly required for a full replacement or re-roof in Midland. Requirements vary by jurisdiction, so we always verify with the City of Midland before starting. You can also check the City of Midland website for general information.
My HOA requires a specific color for metal roofs. Can you help with approval?
Absolutely. We're familiar with many local HOAs and can provide color samples, manufacturer specs, and any documentation they need. We'll coordinate with your HOA to make sure the panel profile and color are approved before we order materials.
Are you insured for work on my property?
Yes, we're fully insured with general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before we start any work.
What maintenance does a metal roof need in Midland's climate?
Because of the dust and sun, we recommend an annual inspection to check fasteners and seals, and a gentle wash once a year to remove dust buildup. After hail storms, have us check for dents or loose panels. We also offer coating and painting services to extend the life of your roof.
Why choose us?

Trusted professionals in Midland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Midland

All your work handled by qualified professionals in Midland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

199+ Verified Client Reviews in Midland

⭐⭐⭐⭐⭐ 4.9/5 · 199 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Midland · Response within 24h · No commitment · ☎ (432) 224-0791

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Midland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm